Headlamp, Changing From RHD To LHD, Halogen Headlamps Through My 2012: Procedure

NOTE:

The cover film has a marking foil, which must be placed along the line around the headlamp lens so that it covers the asymmetrical area of the low beam.

-- Clean the headlamp lenses. They must be clean and dry.

Headlamp Driver's Side:

Fig 1: Positioning Marking Film Around Headlamp Lens (Driver's Side)

Courtesy of AUDI OF AMERICA, LLC

-- Peel off the protective film from the marking film.

-- Position marking film -1- so that it is flush with line -2- around the headlamp lens and the indent -arrow-.

-- Separate the marking film from cover film -3- at the perforation and pull it off of the headlamp lens.

Headlamp Passenger's Side:

Fig 2: Positioning Marking Film Around Headlamp Lens (Passenger's Side)

Courtesy of AUDI OF AMERICA, LLC

-- Peel off the protective film from the marking film.

-- Position marking film -1- so that it is flush with line -2- around the headlamp lens and the indent -arrow-.

-- Separate the marking film from cover film -3- at the perforation and pull it off of the headlamp lens.