LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 2.0T >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET) >> 94 Exterior Lights, Switches >> Headlamps >> Daytime Running Lamps, Removing And Installing >> Left/Right Daytime Running Lamp And Position Lamp Control Module -J860- / -J861-, Removing And Installing >> Removing

Left/Right Daytime Running Lamp And Position Lamp Control Module -J860- / -J861-, Removing And Installing: Removing

Fig 1: Headlight Access Cover
GWWA94-11467Courtesy of AUDI OF AMERICA, LLC

-- Turn the light switch to position "0".

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Do not touch the flasher.

-- On the right: remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Release the retaining tabs -4 and 5-.

-- Remove the housing cover -3-.

-- Press down on release -2- to disconnect the connector -1-.

-- Remove the bolts -arrows-.

Fig 2: Removing Control Module From Housing Cover
GWWA94-11470Courtesy of AUDI OF AMERICA, LLC

-- Remove the control module -2- from the housing cover -3-.