Headlamp Range Control Module, Removing And Installing: Removing

Fig 1: Removing Headlamp Range Control Modules

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Remove the glove compartment, refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Release the retaining clip -arrow- and remove the -1- from the retaining frame.

-- Disconnect the connector -2-.

-- To disconnect the connector, press the tab -1-, turn the retaining bracket in direction of -arrow- and remove the connector.

Fig 2: Catch And Retainer

Courtesy of AUDI OF AMERICA, LLC