Attach the Release Cable to the Hood Release Lever

Fig 1: Attaching Release Cable To Hood Release Lever

Courtesy of AUDI OF AMERICA, LLC

-- Install the release cable -2- into the hood release lever -1- in the direction of the -arrow-.

-- Move the release cable -2- upward as shown below and clip it into the bracket -1-.

Fig 2: Moving Release Cable Upward

Courtesy of AUDI OF AMERICA, LLC

Routing the Release Cable inside the Passenger Compartment 

Fig 3: Routing Release Cable Inside Passenger Compartment

Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- along the A-pillar as shown above.

-- Press the grommet -1- onto the A-pillar from the interior.