LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A8 Base >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Procedures >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> 8-Cylinder 4.0 TFSI Gasoline Engine >> Installing (Cylinder Bank 1 and Cylinder Bank 2)

Installing (Cylinder Bank 1 and Cylinder Bank 2)

-- Install new spark plugs.

-- Grease the ignition coils. Refer to IGNITION COILS, LUBRICATING .

-- Install the ignition coils loosely into the spark plug shaft.

-- Align the ignition coils with the connectors and attach all the connectors at the same time onto the ignition coils.

-- Press ignition coils evenly by hand onto spark plugs (do not use a hammer under any circumstances).

Installation is the reverse of removal.

NOTE: Secure all hose connections with hose clamps that match current standard production.
scientia non olet · About LEMON Manuals