Turbocharger Recirculating Valve -N249-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazards and risk of damage for a faulty engine cover.

The engine cover must be always be installed before the hood is closed.
The engine may neither be started nor driven without an engine cover.

NOTE:

Ignore -1-.

-- Disconnect the connectors -2-.

-- Free up the air guide hose -3-.

-- Remove the bolts -arrows- and then free up the Turbocharger Recirculation Valve -N249- with the air guide.

Fig 1: Identifying Turbocharger Recirculation Valve And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and then remove the Turbocharger Recirculation Valve -N249- -1- from the air guide -2-.

Fig 2: Identifying Turbocharger Recirculation Valve With Bolts

Courtesy of AUDI OF AMERICA, LLC