LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (4.0L - Turbocharger & Supercharger - Engine Code(S): CEUA, CGTA, CTFA & CTGA) >> 21 Turbocharger, Supercharger >> Charge Air System >> Overview - Charge Air Hose Connections

Overview - Charge Air Hose Connections

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.

Tightening specification for

Fig 1: Air Hose Clamp Identification
GWWA21-10396Courtesy of AUDI OF AMERICA, LLC
  1. Clamp -a- = 13 mm (0.511 in.) wide: 5.5 Nm
  2. Hose clamp -b- = 9 mm (0.354 in.) wide: 3.4 Nm