Rear lights in rear lid - bulbs, replacing
Removing
CAUTION:
- Switch off all electrical components.
- Switch ignition off and remove ignition key.
- Turn light switch into "0" position.
- Open cap - 1 - for warning triangle.
- Rotate quick-release screw - 2 - counter-clockwise 90 ° and remove cover - 3 - from luggage compartment lining - direction of arrow -.
- Remove bulb socket - 1 - from housing, press catch bracket - 2 - downward - arrow - to do so.
Lamp, Basis version:
- Unscrew light bulb for tail light and rear fog lamp out of socket.
Lamp with LEDs:
- Remove light bulb for rear fog lamp from socket.
All:
- Pull light bulb for back-up lamp out of socket.
Installing
Installation is performed in reverse order of removal, noting the following:
- Insert new bulb into socket, do not touch glass cone with bare hands when doing so.
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
Tightening torque
| Component | Nm |
| Clamping bracket to body | 3.5 |