Light bulb for turn signal, replacing

Fig 1: Prying Off Cap In Front Wheel House Liner

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Pry off cap - 1  - in front wheel house liner in - direction of arrow  -.

Fig 2: Turning Bulb Socket Counter-Clockwise And Remove From Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Turn bulb socket counter-clockwise - arrow  - and remove from housing.

Fig 3: Identifying Securing Clip, Light Bulb, And Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release securing clip in - direction of arrow  - and pull light bulb - 1  - out of socket - 2  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Insert new bulb into housing, do not touch glass cone with bare hands.
• Push cap into wheel house liner until it engages noticeably.