Tail Lamp, Aligning To Body Contour

Adjustment in Direction of Travel

-- Screw the adjusting nut -1- gradually in and out -arrow- with tail lamp removed. Refer to TAIL LAMP AND OUTER BULB HOLDER .

Fig 1: Screwing Adjusting Nut Gradually In And Out With Tail Lamp Removed

Courtesy of AUDI OF AMERICA, LLC

Adjustment Perpendicular to Driving Direction

-- With tail lamp removed (refer to TAIL LAMP AND OUTER BULB HOLDER ), after loosening bolts -2 and 3-, gradually push in and pull out -arrow- retaining element -1- in stages.

Fig 2: Pushing In And Pulling Out Retaining Element After Loosening Bolts

Courtesy of AUDI OF AMERICA, LLC