Transmission Side Sealing Flange, Removing And Installing, Oil Side Sealing Lip: Removing
WARNING: This page is about a different variant/trim than selected.
- Non-hybrid vehicles: transmission removed. Refer to appropriate service information. .
- Hybrid vehicles: engine is removed and is secured on the Engine and Transmission Holder :VAS6095A . Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .
-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
-- Unhook the intermediate plate from the sealing flange and at the alignment sleeves -arrows-.
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Pry out the sealing flange.