Coolant Pump, Removing And Installing: Removing

Depending on the model, preliminary work may be required. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .

TIP:

Courtesy of AUDI OF AMERICA, LLC

Different versions depending on models and version.

-- Disconnect the connector -1- on the Engine Coolant Temperature Sensor -G62-.

-- Open the clamps -1 and 2-, remove the coolant hoses and move them to the side.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 to 5-.

Fig 1: Coolant Pump Bolt Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant pump from the centering pin and disconnect it from the engine oil cooler.