Lock Carrier Cover, Removing And Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- To remove, remove the locking pin and release the expanding clip.
- Remove the expanding clip from the cover.
- Remove the cover back from the radiator grille.
- When installing, the tabs on the cover must engage on the radiator grille and on the sides of the bumper cover.
- Insert the expanding clip through the cover into the lock carrier and press the locking pin in.
- Expanding Clip
- Remove the clamping pin when removing.
- Only press the clamping pin in when installing.
- Quantity: 4
- Lock Carrier
- Radiator Grille