Connection Diagram - Coolant Hoses
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Blue = large coolant circuit.
Red = small coolant circuit.
Orange = coolant circuit for the charge air cooler.
Brown = heating circuit.
The arrows show the coolant flow direction.
Vehicles without Auxiliary Heater
- Front Charge Air Cooling Circuit Radiator
- Change the coolant after replacing
- Radiator
- with ATF cooler
- Change the coolant after replacing
- Engine Coolant Temperature Sensor -G62-
- Coolant Thermostat
- Coolant Pump
- Right Charge Air Cooler
- Inside the compressor housing
- Change the coolant after replacing
- Bleed Screw
- Cylinder Head
- Cylinder bank 1 (right)
- Change the coolant after replacing
- Bleed Screw
- Heater Core for Heater
- Removing and installing, refer to HEATER CORE, REMOVING AND INSTALLING .
- Change the coolant after replacing
- Coolant Recirculation Pump -V50-
- Engine Temperature Control Sensor -G694-
- Cylinder Head
- Cylinder bank 2 (left)
- Change the coolant after replacing
- Bleed Screw
- Left Charge Air Cooler
- Inside the compressor housing
- Change the coolant after replacing
- Cap
- Checking the pressure relief valve, refer to PRESSURE RELIEF VALVE IN CAP, CHECKING (See Figure).
- Coolant Expansion Tank
- Engine Oil Cooler
- Change the coolant after replacing
- Check Valve
- Inside the coolant hose
- Check Valve
- Inside the coolant hose
- Check Valve
- Inside the coolant hose
- Left Charge Air Cooling Circuit Radiator
- Equipment levels
- Change the coolant after replacing
- Charge Air Cooling Pump -V188-
Vehicles with Parking Heater
- Front Charge Air Cooling Circuit Radiator
- Change the coolant after replacing
- Radiator
- With ATF cooler
- Change the coolant after replacing
- Engine Coolant Temperature Sensor -G62-
- Coolant Thermostat
- Parking Heater
- With Recirculation Pump -V55-
- Removing and installing, refer to AUXILIARY HEATER HEATING ELEMENT -Z35-, REMOVING AND INSTALLING .
- Coolant Pump
- Right Charge Air Cooler
- Inside the compressor housing
- Change the coolant after replacing
- Bleed Screw
- Cylinder Head
- Cylinder bank 1 (right)
- Change the coolant after replacing
- Heater Coolant Shut-Off Valve -N279-
- Removing and Installing, refer to AUXILIARY HEATER HEATING ELEMENT -Z35-, REMOVING AND INSTALLING .
- Bleed Screw
- Heater Core for Heater
- Removing and installing, refer to HEATER CORE, REMOVING AND INSTALLING .
- Change the coolant after replacing
- Engine Temperature Control Sensor -G694-
- Cylinder Head
- Cylinder bank 2 (left)
- Change the coolant after replacing
- Bleed Screw
- Left Charge Air Cooler
- Inside the compressor housing
- Change the coolant after replacing
- Cap
- Checking the pressure relief valve, refer to PRESSURE RELIEF VALVE IN CAP, CHECKING (See Figure).
- Coolant Expansion Tank
- Engine Oil Cooler
- Change the coolant after replacing
- Check Valve
- Inside the coolant hose
- Check Valve
- Inside the coolant hose
- Check Valve
- Inside the coolant hose
- Left Charge Air Cooling Circuit Radiator
- Equipment levels
- Change the coolant after replacing
- Charge Air Cooling Pump -V188-