Condensation Water Drain, Checking: Checking

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT FLOOR PANEL, REMOVING AND INSTALLING , also see OVERVIEW - LUGGAGE COMPARTMENT FLOOR .

-- Bring the battery cooling module in the service position. Refer to BATTERY COOLING MODULE, BRINGING INTO SERVICE POSITION .

-- Check the condensation water drain -3- for debris and make sure it is installed correctly.

Fig 1: Attaching Condensation Water Drain To Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Check that the condensation water drain is in the correct position.

Fig 2: Checking Condensation Water Drain Is In Correct Position

Courtesy of AUDI OF AMERICA, LLC

The tab -2- must face the seam -1- in the bracket.