LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A5 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 618 (Heating, Ventilation & Air Conditioning (2 Of 2) (As Of 06.2014)) >> 87 Air Conditioning >> Additional Components For Control And Regulation >> Rain/Light Recognition Sensor -G397-, REMOVING AND INSTALLING >> Notes

Rain/Light Recognition Sensor -G397-, REMOVING AND INSTALLING: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Risk of unintended engine start

The ignition must be turned off and the ignition key must remain outside of the vehicle when working on vehicles with a high voltage system.

NOTE:

Depending on time period of production (from MY 2012 as a running change) and vehicle version, the Humidity Sensor -G355- no longer operates as an individual part in the DTC memory. For these vehicles, if there is a difference on the Humidity Sensor -G355-, the Rain/Light Recognition Sensor -G397- is displayed as the faulty location using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

Starting from MY 2010, there is a running change for the version of the Humidity Sensor -G355- (with or without Rain/Light Recognition Sensor -G397-). Removing and installing is different for both versions. Depending on the date of manufacture and the vehicle version, version "1" (discontinued as a running change through MY 2009) or version "2" (running change from MY 2010) can be installed.

scientia non olet · About LEMON Manuals