LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A5 2.0T >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet) >> 21 Turbocharger, Supercharger >> Turbocharger >> Overview - Turbocharger >> Part III >> Tightening Sequence And Specifications

Tightening Sequence And Specifications

Fig 1: Tighten The Bolts In Steps In The Sequence Shown
GWWA21-10341Courtesy of AUDI OF AMERICA, LLC

-- TIGHTEN THE BOLTS IN STEPS IN THE SEQUENCE SHOWN WITH TIGHTENING SPECIFICATION 

Step Bolts Tightening Specification
1. -1 to 5- 3 Nm
2. -1 to 5- 12 Nm
3. -1 to 5- 16 Nm
4. -1 to 5- 25 Nm
scientia non olet · About LEMON Manuals