Brake Caliper, Removing And Installing, 1LT And 1LY: Installing

NOTE:

Clean Bolts Before Reusing

Replace Damaged Bolts

Always replace self-locking bolts.

-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.

-- Tighten the brake carrier with bolts -5-.

Fig 1: Exploded View Of Brake Caliper Components

Courtesy of AUDI OF AMERICA, LLC

-- Place the brake hose in the bracket.

-- Install The Wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower The Vehicle.