Overview - Cover And Cushion, Rear Seat Backrest

Fig 1: Exploded View Of Cover & Cushion, Rear Seat Backrest Assembly

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Cushion
   • Cover with Cushion, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST .
   • Cover and Cushion, Disconnecting and Assembling. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST 
2. Wire
   • Encapsulated in cushion
   • For securing the cover to the cushion
3. Contour Wire
   • Pushed into the cover mounting pocket
4. Upholstery Clip
   • For securing the cover to the cushion
   • Always replace if removed
   • Install in same location as before removal
5. Cover
   • Cover with Cushion, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST .
   • Cover and Cushion, Disconnecting and Assembling. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST 
6. Zip Fastener
   • Sewn into cover
7. Retaining Channel
   • Sewn into cover
8. Backrest Shell
   • Removing and Installing. Refer to REAR SEAT BACKREST SHELL, REMOVING AND INSTALLING .