Overview - End Cover
CAUTION:
Danger of causing damage to the transmission.
- Do not let the engine run or tow the vehicle when the cover is removed or when there is no Automatic Transmission Fluid (ATF) in the transmission.
NOTE:
Refer to REPAIR INFORMATION .
Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
- Transmission
- Small Axial Sealing Element
- Replacing
- Large Axial Sealing Element
- Replacing
- Roller
- Lever
- For the selector lever lock mechanism
- Spring
- Seal
- For the Transmission Control Module -J217- connector
- Bolt
- 10 Nm +90° turn
- Replacing
- Quantity 12, tighten diagonally
- Cover
- Removing and installing with the transmission installed. Refer to END COVER, REMOVING AND INSTALLING .
- Removing and installing, refer to END COVER, REMOVING AND INSTALLING
- Seal
- Replacing
- Bolt
- 5 Nm + 90° turn
- Quantity: 3
- Transmission Control Module -J217-
- Bolt
- 5 Nm + 90° turn
- Quantity: 3
- Hydraulic Control Unit