Codes, Transmission Allocations, Ratios And Capacities (For AUDI A6 From My 2011)

WARNING: This page is about a different variant/trim than selected.

Production date
The engine, manual transmission and automatic transmission allocation using the code letters and the PR numbers

Rear Final Drive		0BF
Codes		MKU	MKV
Ratio	Final drive Z₂ : Z₁	37 : 9 = 4.111	43 : 13 = 3.308
Driveshaft flange diameter		75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No replacement interval		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity For the hydraulic control unit and chambers No replacement interval		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .