Refrigerant Lines, Disconnecting And Connecting At Condenser: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with 4.2L, RS4 and RS5

Special tools and workshop equipment required

Engine Bung Set VAS6122

NOTE:

There are different versions of the condenser. Ensure the correct version and allocation before installing. Refer to CONDENSER, CHECKING VERSION

It may be necessary to evacuate the refrigerant circuit and remove the refrigerant pipes from the condenser in order to remove the condenser from the front end or to remove the radiator depending on the version of the radiator and the condenser (for example, on the Audi RS4 and the Audi RS5). Refer to CONDENSER, REMOVING AND INSTALLING .

On the Audi RS4 and Audi RS5, a different version of the condenser is installed than as on other vehicles of this series and the length of the refrigerant lines may also differ from other vehicles. Pay attention to the correct allocation and refrigerant R134a capacities. Refer to REFRIGERANT R134A CAPACITIES, REFRIGERANT OIL AND APPROVED REFRIGERANT OILS (Refrigerant R134a Servicing, Refrigerant R134a Refrigerant Oil and Approved Refrigerant Oil Capacities) .