Overview - Retainer
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
In the illustration is 2/3 left rear seat is shown.
- Connector Station
- For the upper and lower cable
- Clipped to the seat frame
- Rear Seat
- Bracket
- For the upper cable
- Quantity: 4
- Upper Cable
- For the backrest release
- Removing and installing. Refer to UPPER CABLE, REMOVING AND INSTALLING .
- Bolt
- 1.5 Nm
- Actuator
- For the backrest release
- Removing and installing. Refer to BACKREST LOCK ADJUSTMENT ACTUATOR, REMOVING AND INSTALLING .
- Bracket
- For the actuator
- Removing and installing. Refer to ACTUATOR BRACKET, REMOVING AND INSTALLING .
- Nut
- 3 Nm
- Quantity: 2
- Release Handle
- Removing and installing. Refer to LOCKING LEVER, REMOVING AND INSTALLING .
- Washer
- Bolt
- 18 Nm
- Install with locking compound. .
- Lower Cable
- For the backrest release
- Removing and installing. Refer to LOWER CABLE, REMOVING AND INSTALLING .
- Backrest Release Handle
- Removing and installing. Refer to LOCKING HANDEL, REMOVING AND INSTALLING .