LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Cabriolet)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Input Shaft >> Input Shaft, Disassembling >> Press Roller Bearing Off Input Shaft.

Press Roller Bearing Off Input Shaft.

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Press Roller Bearing Off Input Shaft
GWWA35-10117Courtesy of AUDI OF AMERICA, LLC

A - Separating device 22 to 115 mm, for example Kukko 17/2

NOTE:
  • The roller bearing will get damaged when it is being removed, therefore always replace it.
  • The roller bearing cage can also get damaged when removing using a screwdriver. Then mount the separating tool on the inner race.

-- Clean the bolt threads on input shaft from locking compound residue.

scientia non olet · About LEMON Manuals