LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A4 2.0T >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Mechanical Components (Sedan) (As Of 01.2014) >> 46 Mechanical Components >> Front Brakes >> Brake Rotor, Replacing >> Brake Rotor, Replacing, 1LM >> Removing

Brake Rotor, Replacing, 1LM: Removing

-- Raise the vehicle.

-- Remove the wheels.

-- Remove the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING, 1LM .

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LM .

Secure the brake caliper to the vehicle with a suitable wire. Do not support the weight of the brake caliper with the brake hose.

-- Remove the bolt -1- from the brake rotor.

Fig 1: Overview Of Front Brakes Components (1LM)
GWWA46-10160Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake rotor from the wheel hub.

NOTE:

When removing the brake rotor from the wheel hub, do not tilt the brake rotor.

scientia non olet · About LEMON Manuals