LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A4 2.0T >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Mechanical Components (Sedan) (As Of 01.2014) >> 46 Mechanical Components >> Front Brakes >> Brake Caliper, Removing And Installing >> Brake Caliper, Removing And Installing, Ceramic Brakes 1LW >> Notes

Brake Caliper, Removing And Installing, Ceramic Brakes 1LW: Notes

NOTE:

Do not loosen the bolts -1- to remove the brake caliper.

Fig 1: Overview Of Front Brakes Components, Ceramic Brakes (1LW)
GWWA46-10143Courtesy of AUDI OF AMERICA, LLC
  1. 4 -

    Brake Caliper

    • do not hang on brake hose during necessary installation steps, but rather secure to body with wire.
  2. 10 -

    Bolts

    • 196 Nm.

      Always replace if removed

  3. 11 -

    Brake Carrier

    • 190 Nm
    • Bolt to wheel bearing housing
    • Bolted with brake caliper
  4. 13 -

    Bracket Bolt

    • 25 Nm
  5. 16 -

    Brake Line Bracket

    • Hook in brake line
NOTE:

Do not loosen the bolts -1- to remove the brake caliper.

Fig 2: Overview Of Front Brakes Components, Ceramic Brakes (1LW)
GWWA46-10143Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals