Overview - Cover And Cushion, Super Sport Seat

Fig 1: Overview Of Cover And Cushion, Super Sport Seat

Courtesy of AUDI OF AMERICA, LLC

1. Seat Bench Frame
2. Cushion
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, SUPER SPORT SEAT 
3. Cover
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITHOUT CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, SUPER SPORT SEAT 
4. Clip
   • Covered in foam padding
5. Clip
   • Covered in foam padding
6. Contour Wire
   • Pushed into the cover
7. Molding
   • Sewn into cover
   • For engaging the cover in the seat bench frame
8. Clip
   • Covered in foam padding
   • Only with fabric covers
9. Cushion Clip
   • Only with leather covers
   • for securing the cover to the padding
   • Always replace if removed
   • Install in same location as before removal