Final Drive Identification, Rear Final Drive 0BF And 0BE, Sport Differential

WARNING: This page is about a different variant/trim than selected.

NOTE:

Code letters, transmission allocations, ratio and capacities. Refer to TRANSMISSION/ENGINE ALLOCATION , and CAPACITIES .

When repairing the driveshaft or rear final drive. Refer to DRIVESHAFT and FINAL DRIVE .

Location on Rear Final Drive

Fig 1: Identifying Location On Rear Final Drive

Courtesy of AUDI OF AMERICA, LLC

Clutch class -arrow 1-.

Engine code and production date -arrow 2-

NOTE:

The way to recognize the rear final drive "0BE" and "0BF" is the hydraulic control unit with the side chambers.

-Arrow 1- code -LFW-

Fig 2: Identifying Last Six Characters Of Serial Number
Courtesy of AUDI OF AMERICA, LLC
-Arrow 2- Rear final drive build dates

Example:	08	12	09
	I	I	I
	Production year -2008-	Month	Day

-Arrow 3- Classification (classification of the clutch wear values) for the right clutch. Example: -272D-
-Arrow 4- Classification (classification of the clutch wear values) for the left clutch. Example: -4A10-

Additional data can be ignored.

NOTE:

When installing a new rear final drive unit, the final drive code, the PR number and the vehicle engine code must be verified . This is the only to assure the correct allocation.