LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Controls & Housing - Manual Transmission 0B4 (Sedan)) >> 34 Controls, Housing >> SUBFRAME Mount >> Transmission Support With Transmission Mount, Removing And Installing >> Removing

Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

Fig 1: Identifying Bolts And Transmission Support With Transmission Mount To Transmission
GWWA34-10403Courtesy of AUDI OF AMERICA, LLC