LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Controls & Housing - Manual Transmission 0B4 (Sedan)) >> 34 Controls, Housing >> SUBFRAME Mount >> Transmission Support With Transmission Mount, Removing And Installing >> Installing

Transmission Support With Transmission Mount, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Tighten the transmission support with the transmission mount on the transmission -arrows-. Tightening specification, refer to -item  3- Bolt (See Figure).

-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals