Special Tools

Fig 1: Identifying Special Trust Bearing Tools

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Press Plate VW402
• Press Piece - Multiple Use VW412
• Press Piece - Multiple Use VW510
• Hydraulic Press - Ball Joint Assembly Tools T10254
• Press Piece - Deflection Ring T40089

Fig 2: Identifying Special Press Tools

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Press Piece - 37mm VW416B
• Bearing Installer - Differential Bearing VW511
• Press Piece - Bushing - 50mm Diameter VW554
• Press Piece - Multiple Use 30-11
• Press Piece - Multiple Use 0-23
• Bearing Installer - Wheel Bearing 3345

Special tools and workshop equipment required 

• Puller - Flanged Shaft T10037
  Fig 3: Identifying Extractor T10037

  Courtesy of AUDI OF AMERICA, LLC
• Alignment Tool - Clutch Plate T40171
  Fig 4: Identifying Locking Pin T40171

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Clutch Module T40176
  Fig 5: Extractor T40176

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer Set - Hammer VW771/1
  Fig 6: Adapter VW 771/40 From Slide Hammer-Complete Set VW 771

  Courtesy of AUDI OF AMERICA, LLC
• -1- Puller - Kukko Internal - 20-30mm 21/4
  Fig 7: Identifying Kukko Puller

  Courtesy of AUDI OF AMERICA, LLC
• -1- Puller - Kukko Internal - 28-37mm 21/5
• Bearing Installer - Multiple Use 3062
  Fig 8: Identifying Thrust Pad 3062

  Courtesy of AUDI OF AMERICA, LLC