LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Cylinder Head, VALVETRAIN- CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Cylinder Head, VALVETRAIN >> Cylinder Head >> Compression Pressure, Checking >> Assembling

Compression Pressure, Checking: Assembling

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Assemble in reverse order of disassembling. Note the following: 

-- Install the glow plugs. Refer to GLOW PLUG, REMOVING AND INSTALLING .

-- There will be entries stored in the Engine Control Module (ECM) Diagnostic Trouble Code (DTC) memory if the engine was started while the connectors were disconnected: Check DTC Memory  in OBD  . Refer to Vehicle Diagnostic Tester.