Transmission Support With Transmission Mount, Removing And Installing, Manual Transmission: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the tunnel crossmember. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] [For engine(s) CYNB, CPNB] .
-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.