LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (Engine Assembly- CYNB) >> Engine Assembly >> Assembly Mounts >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing >> Removing

Transmission Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts 

-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -1- and remove the stop -2- for the transmission mount.

GWWA34-11240Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -5- and remove the transmission mount -3- from the transmission support -4-.



CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts 

-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, DSG TRANSMISSION 0B5/AUTOMATIC TRANSMISSION 0BK .

-- Remove the bolt -1- and lower -2- for the transmission mount.

GWWA37-11041Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- and the bolt -5- and remove the transmission mount -6- from the transmission support -3-.