LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 988 (Crankshaft, Cylinder Block- CREC, Cred, CREH) >> Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Overview - Piston And Connecting Rod >> Mark Connecting Rods

Mark Connecting Rods

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-0466Courtesy of AUDI OF AMERICA, LLC
NOTE:

Only Replace Connecting Rod As A Set.

Do Not Interchange Connecting Rod Bearings.

-- Mark the connecting rod and connector rod bearing caps to each other and to the cylinder -arrow- with paint for installation.

scientia non olet · About LEMON Manuals