Sensor Wheel, Checking
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There Is A Risk Of Destroying The Sensor Wheel By Magnetic Force.
- Do not place the sensor wheel near magnets (for example inspection lamp base, or speakers).
- If the drive plate/flywheel or the sensor wheel removes on its own or is replaced, before installing the sensor wheel function must be checked. Refer to SENSOR WHEEL, CHECKING .
Special Tools And Workshop Equipment Required
- Gauge - Sender Wheel :T10473
- Sensor wheel removed. Refer to SENSOR WHEEL, REMOVING AND INSTALLING .
-- Check the entire circumference of the sensor wheel with the :T10473 as shown.
Sensor Wheel Test Diagram
A - Sensor wheel OK
B - Sensor wheel faulty