LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 987 (Crankshaft, Cylinder Block- CEUC, CRDB, CTGE, CWUB, CWUC) >> Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Installing

Sensor Wheel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

-- Install the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- The "combustion misfire adaptation" must be adjusted after replacing the transmission. Select 01 - Reset Combustion Misfire Adaptation  in Guided Fault Finding  see Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals