LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Battery Cooling Module >> Air Distribution Channels, Removing And Installing >> LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING >> Removing

LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT TRIM PANELS .

GWWA87-11136Courtesy of AUDI OF AMERICA, LLC
NOTE:

Remove the traction battery when removing the air guide for vehicles with additional bolted connections -1 and 3-.

Vehicles with Additional Bolted Connections for the Air Guides:

-- Remove the traction battery. Refer to appropriate service information. .

-- Remove the bolts -1, 2 and 3- and the air guides.

Vehicles without Additional Bolted Connections for the Air Guides:

-- Remove the traction battery cover. Refer to appropriate service information. .

-- Remove the corresponding front bracket for the luggage compartment floor. Refer to LUGGAGE COMPARTMENT TRIM PANELS .

-- Remove the bolts -2- and carefully unclip the air guides from the retainers.