LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Battery Cooling Module >> Air Distribution Channels, Removing And Installing >> LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING >> Installing

LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA87-11136Courtesy of AUDI OF AMERICA, LLC

Installation is carried out in the reverse order while observing the following.

CAUTION:

If the retainers for the air guides no longer hold, the air guides must be secured with additional bolts -1 and 3-. Remove the traction battery to do this. Refer to appropriate service information .

-- Reinstall all of the previously removed components.

-- Turn on the ignition.

-- Check the A/C system Diagnostic Trouble Code (DTC) memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary. Refer to Vehicle Diagnostic Tester in the "Guided Fault Finding" function.