LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Additional Components For Control And Regulation >> Thermal Management Control Module -J1024-, REMOVING AND INSTALLING (AUDI A6 E-TRON) >> Thermal Management Control Module -J1024-, Removing

Thermal Management Control Module -J1024-, Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the right front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Disengage and remove the connector -A-.

GWWA87-12266Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -B-, and remove the Thermal Management Control Module -J1024- -C- -arrow-.

scientia non olet · About LEMON Manuals