LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Additional Components For Control And Regulation >> Outside Air Temperature Sensor -G17-, REMOVING AND INSTALLING >> Removing

Outside Air Temperature Sensor -G17-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA90-10156Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to Front Bumper .

-- Carefully press the retaining clips together -arrow- and pull the Outside Air Temperature Sensor -G17- -2- out of the mount.

-- Disconnect the connector -1-.

scientia non olet · About LEMON Manuals