Overview - Radiator/Coolant Fan: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Air Guide
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure
- O-ring
- Always replace
- Radiator
- Removing and installing. Refer to RADIATOR, REMOVING AND INSTALLING .
- After replacing, replace entire amount of coolant
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure
- O-ring
- Always replace
- Coolant line
- To the coolant reservoir
- To remove, press the release ring
- Connecting. Refer to Figure
- O-ring
- Always replace
- Rubber Bushing
- For the radiator
- Retaining Pin
- Disengage and remove using screwdriver
- Air Guide
- Bolt
- 2.5 Nm
- Condenser
- Removing and installing. Refer to CONDENSER, REMOVING AND INSTALLING .
- Air Guide
- Rubber Bushing
- For the radiator
- Radiator Bracket
- Bolt
- 5 Nm
- Backing Plate
- Bolt
- 4.5 Nm