LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Temperature Control Actuator -N493-, Removing And Installing >> Installing

Engine Temperature Control Actuator -N493-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Install The Coolant Pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals