Engine Coolant Temperature Sensor On Radiator Outlet -G83-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is cold.
-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.
-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Disconnect the connector -1- from the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.
NOTE:
Use A Cloth To Catch Any Leaking Coolant.
Insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- immediately in the connection to prevent coolant loss.
-- Open the clamp -2- and remove the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.