Right Coolant Pipe, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the engine cover. Refer to the appropriate service information ; ENGINE COVER, REMOVING AND INSTALLING [CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA ENGINES] , ENGINE COVER, REMOVING AND INSTALLING [CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB ENGINES] .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the bolt -arrow- and remove the crankcase ventilation from the turbocharger.

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clip -1-, loosen the clamp -2- and remove the coolant hoses.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-, disconnect the right coolant pipe from the cylinder block and remove it.