LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 977 (Climate Control System (Service Information - (Refrigerant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Refrigerant Circuit >> Valve, Removing And Installing At Service Connection On Low And High Pressure Side >> Removing

Valve, Removing And Installing At Service Connection On Low And High Pressure Side: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the sealing caps (with seal) -2 or 3-.

GWWA87-11497Courtesy of AUDI OF AMERICA, LLC

-- Discharge the refrigerant circuit. Refer to appropriate service information .

-- Remove the valve -1- from the service connection using a suitable adapter from the :T10364  .

NOTE:

There is additional information for the service connection. Refer to SERVICE CONNECTION DIFFERENCES, DEPENDING ON REFRIGERANT (R134A OR R1234YF) , .

scientia non olet · About LEMON Manuals