LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (General Maintenance (2 Of 2)) >> Maintenance >> Maintenance Work >> Coolant Level, Checking, Specified Value Is Top Marking On Expansion Tank Coolant Levels Above Top Marking Are Permitted, Below Are Not >> Coolant, Filling >> Procedure:

Coolant, Filling: Procedure:

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Fill the missing amount in the mixture ratio which corresponds to the freeze protection specification. Refer to FLUID CAPACITY TABLES - MODEL YEAR: 2018FLUID CAPACITY TABLES - MODEL YEAR: 2016FLUID CAPACITY TABLES - MODEL YEAR: 2017 . . Observe the coolant mixture according to the table.

NOTE:

Small quantities of coolant can be added. When larger quantities of coolant are needed, the :VAS6096  should be used.

scientia non olet · About LEMON Manuals