Lower Front Longitudinal Member, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wheel spoiler. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
RS6:
-- Remove the nut -3-.
-- Loosen the hose clamp -2- and remove the coolant hose with the : 3094 above and below the coolant pipe.
Continuation:
-- Remove the bolts -arrows- and the front lower longitudinal member -1-.