LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Exterior System (Bumpers - Service Information)) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Lock Carrier Cover, Removing And Installing >> Installing

Lock Carrier Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Slide the lock carrier cover into the groove in the lock carrier and then push it onto the radiator grille and bumper cover.