Wiring Harness Repair Set:VAS631001

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The :VAS631001 makes optimal repair quality possible in the realm of vehicle electronics. Using this wiring harness repair set, repairs affecting aluminum wires in the area of the harness connectors and for breaks in wiring can be performed. The copper repair wires are also used and complete repair wires with already crimped on/connected contacts. The connection with the vehicle-specific wiring harness takes place with three different wire cross-sections butt connectors.

The :VAS631001 for aluminum wires is comprised of the following components:

Crimping tool without crimp insert and positioning aid :VAS631001/1
Crimping insert and positioning aid 25 mm² -aluminum wires :VAS631001/2
Crimping insert and positioning aid 4 mm² -aluminum wires :VAS631001/3
Crimping insert and positioning aid 6 mm² -aluminum wires :VAS631001/4
Wire stripper for aluminum wires :VAS631001/5

CAUTION:

For repairing the aluminum wires only use the corresponding butt connectors with heat-shrinkable tube. Refer to the parts information.

NOTE:

Additional information:

Refer to the :VAS631001 Owner's Manual.